VISBELLA® DIY Headlight Restoration and Protection Kit

Shine and restore clarity to scratched, cloudy or yellowed headlight lenses! This kit improves headlight, taillight, fog light or directional light brightness and protects from further UV oxidation to keep you driving safe while enhancing your vehicle's appearance.

The kit includes all items necessary to produce professional results with 3 easy steps - sand, polish, and protect - so you won't have to spend time and money taking it to the shop or replacing the headlight.

---INSTRUCTIONS:

Prepare: Clean the headlight lens with water and mask off the surrounding perimeter to avoid scratching the paint.

Step 1. Sand - Wet the sanding disc and attach it to the backer pad. Sand with three different grits, from coarse to fine: P800--> P1200-->P2000, to completely remove the yellowing, fading, and corrosion.

Step 2. Polish - Attach the orange sponge disc to the backer pad and apply the polish paste until the shine is restored to its original condition.

Note: For best results, use an electric buffer or polisher (not included). If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.

Step 3. Protect - Clean the headlight lens and make sure it's dry and not under direct sunlight. Using the white sponge disc, evenly apply a layer of the protective liquid on the surface of the lens. Allow it to sit and dry for 15 minutes. Then, allow the liquid to cure in direct sunlight for 1-2 hours. 

After step 3, keep the lens completely dry for 24 hours.

CONTENT LIST (sufficient for 2 headlights): 

• 2x P800 Sanding Discs
• 2x P1200 Sanding Discs
• 2x P2000 Sanding Discs
• 1x Orange Sponge Disc
• 2x 28.3ml Polish Paste
• 2x 3.0ml Protect Liquid
• 1x Mask Tape (300 x 2cm)
• 1x Backer Pad M10 Thread
• 1x Adaptor     
• 1x Sponge Disc White
• Instruction Manual